Marlin Deep fins are lightweight fins for spearfishing and freediving with a removable blade. The blade is made of polypropylene and has medium hardness. The lightweight footpocket is made of thermoplastic rubber with varying degrees of hardness. The rigid sole increases the transmitted energy, the soft upper has good elasticity, ensuring ease of dressing and comfort during long-term use. The blade breaking angle of 22 degrees provides an optimal balance of efficiency and stroke force, reduces the load on the muscles of the lower leg and foot, and guarantees a fairly high speed of movement in the water.

Marlin Open Cell Sheico Gloves are made of soft and elastic neoprene with a thickness of 5mm from Sheiko manufacturer. The outer surface is black nylon, the inner surface is an open cell, which ideally keeps warmth. Anatomical cut provides a comfortable and snug fit, thus preventing water circulation.  Palm areas have abrasion resistant duratex material. This model is suitable for spearfishing and diving.

Marlin Skiff Pro wetsuit is an updated model of the Skiff 2.0 wetsuit. This model uses flexible and soft neoprene brand L from Sheiko. Anatomically accurate cut of the wetsuit, consisting of 35 parts, provides maximum free movement of the underwater hunter in the water.

With a cut it's easy! Let's see if there is any burrs on the ends that are going to be docked, glued. If there are any, they must be removed with scissors. (TIP: When cutting with scissors, try to make a long, non-tearing cut, so there would be no burrs) The flatter the plane of the parts to be glued, the stronger will be the glue. Apply a thin layer of glue for neoprene on the joints, spread it thoroughly over the surface (you can use a match or a plastic wand). Do not glue! Wait 3-4 minutes. Then connect and with a little effort squeeze the edges.

The Marlin Boots are 5mm neoprene boots with rubber sole, rubberized toe, heel and instep. The model has a large side zipper of the Japanese company YKK, duplicated with a Velcro fastener. Wedge-shaped neoprene insert behind the zipper prevents water circulation. Instep reinforcement protects against pinching, friction against the fin’s seal and prolongs the service life of the boots. An additional heel cleat provides a secure fixing for the fin strap.